Analog Electronic Module 2 Ai I; Front And Side Elevations Of The 2 Ai I Analog Electronic Module - Siemens Metro 21 M216KA Operator's Manual

SC Analog Electronic Modules – T echnical Data
12.3 Analog Electronic Module 2 AI I (...123-1GB00...)
Order Number
Characteristics
Front Elevation/
Side Elevation
12-14
6ES7 123-1GB00-0AB0
The 2 AI I analog electronic module is an analog input module with the fol-
lowing characteristics:
2 inputs for current measurement
Input ranges 20 mA and 4...20 mA
13/12-bit resolution
Input range selection
Isolation from the SC bus
Permissible common-mode voltage of AC 2 V
The figure below shows the front elevation and the side elevation of the two-
channel input module.
The circuit shematic is shown on the front elevation of the input module. In
its operative state the circuit schematic is covered by the labeling strip.
Front elevation
A1 A2
A3 A4
Figure 12-7 Front and Side Elevations of the 2 AI I Analog Electronic Module
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
SS
Side elevation
The used terminals are shaded gray.
Slot 1 is shown.
EWA 4NEB 780 6009-02c