Setting Parameters With The Bop Or Aop - Siemens SED2 Commissioning Manual

6.4 Setting parameters with the BOP or AOP

The following describes how to change parameter P1082. Use this description as a guide to setting all other
parameters with the BOP.
Changing P0004 –
parameter filter function
Changing the setting of
the maximum motor
frequency P1082
Siemens
Building Technologies
Step
Press to access the parameters
1
Press until P0004 is displayed
2
Press to access the parameter value level
3
4
Press or
Press to confirm and save the value
5
6 Only the motor parameters are now visible for the user
Step
Press to access the parameters
1
Press until P1082 is displayed
2
Press to access the parameter value level
3
Press or to display the required value
4
Press to confirm and save the value
5
Press until r0000 is displayed
6
Press to revert to the standard motor display (as
7
defined by the customer)
Commissioning Guide
6 Commissioning
Action
to display the required value
Action
Resulting display
Resulting display
35 / 100
CM1G5192en
29.07.2010