Sliding The Labeling Strip Into The Terminal Block - Siemens Metro 21 M216KA Operator's Manual

Sliding the
Labeling Strips
into the Terminal
Block
Figure 2-5

Sliding the Labeling Strip into the Terminal Block

ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
EWA 4NEB 780 6009-02c
Proceed as follows:
1. Note the assignment between the slot and the module on the labeling
strip.
2. Slide the labeling strip from the side into the terminal block guide.
Installation
2-9