Siemens Metro 21 M216KA Operator's Manual page 351

Type and Device Master Files
Type File
Device Master File
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
EWA 4NEB 780 6009-02c
All the properties of a DP slave are stored in a type file.
You can integrate the type file of the ET 200L (Table C-1) in COM ET 200
as of Version 4.0, COM ET 200 Windows and STEP 7.
The type files for the ET 200L-SC (Table C-4) can be integrated in
COM ET 200 Windows as of Version 2.1.
The type files for a default start-up of the ET 200L-SC with a standard, non-
Siemens DP master are described in Table C-14. You can integrate the type
files of the default start-up in COM ET 200 Windows as of Version 1.0.
If you need the type file, you can get it using a modem by calling +49 (911)
737972 or from the SINEC library in AUTFORUM in CompuServe
(GO AUTFORUM).
All slave-specific characteristics are stored in a device master file (GSD file).
The structure of the device master file is laid down in EN 50 170 Volume 2,
PROFIBUS.
If you need the device master file, you can get it using a modem by calling
+49 (911) 737972 or from the SINEC library in AUTFORUM in
CompuServe (GO AUTFORUM).
B
B-1