12.8 Analog Electronic Module 1 Ai Rtd; Front And Side Elevations Of The 1 Ai Rtd Analog Electronic Module - Siemens Metro 21 M216KA Operator's Manual

SC Analog Electronic Modules – T echnical Data

12.8 Analog Electronic Module 1 AI RTD

Order Number
Characteristics
Front Elevation/
Side Elevation
12-44
6ES7 123-1JA00-0AB0
The 1 AI RTD analog electronic module is an analog input module with the
following characteristics:
1 input for a resistance thermometer or resistance measurement
0.01 C/digit or 14-bit resolution
Input ranges for the Pt100 climatic range, Pt100 standard range,
Ni100 standard range or 0... 600
Input range selection
Linearization of sensor characteristic curves
Isolation from the SC bus
Permissible common-mode voltage of AC 2 V
The figure below shows the front elevation and the side elevation of the input
module.
The block diagram is shown on the front of the input module. In the operat-
ing state, the block diagram is covered by the labeling strip.
Front elevation
A1 A2
A3 A4
Figure 12-22 Front and Side Elevations of the 1 AI RTD Analog Electronic Module
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
SS
Side elevation
The used terminals are shaded gray.
Slot 1 is shown.
EWA 4NEB 780 6009-02c