Static Parameters Of The 1 Ao U Electronic Module - Siemens Metro 21 M216KA Operator's Manual

SC Analog Electronic Modules – T echnical Data
Parameters
Table 12-10

Static Parameters of the 1 AO U Electronic Module

Parameter
Measurement type
Output range (voltage)
Interference frequency suppression
Smoothing
Format
Default Parameters
12-52
The 1 AO U electronic module uses the following parameters:
Value Range
Deactivated
Voltage
10 V
1 ... 5 V
50 Hz (integration time 60 ms)
60 Hz (integration time 50 ms)
None
Weak
Medium
Strong
SIMATIC S7
SIMATIC S5
If you have not set the parameters of the 1 AO U electronic module using the
specified software (see Chapter 4), the default settings apply to both input
channels after a restart (see Table 12-10).
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Default Parameters
Voltage
10 V
50 Hz
None
SIMATIC S7
EWA 4NEB 780 6009-02c