SC Analog Electronic Modules – T echnical Data
Parameters
Table 12-5
Static Parameters of the 2 AI HS I Electronic Module
Parameter
Measurement type
Measurement range (4-wire
measuring transducer)
Smoothing
Format
Default Parameters
12-28
The 2 AI HS I electronic module uses the following parameters:
Value Range
Deactivated
Current (4-wire measuring
transducer)
4...20 mA
20 mA
None
Weak
Medium
Strong
SIMATIC S7
SIMATIC S5
If you have not set the parameters of the 2 AI HS I electronic module using
the specified software (see Chapter 4), the default settings of all parameters
apply to both input channels after a restart (see Table 12-3).
ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device
Default Parameters
Current (4-wire measuring
transducer)
4...20 mA
None
SIMATIC S7
Scope
Channel
Channel
Channel
Channel
EWA 4NEB 780 6009-02c