Configuring The F-Di Signal Module - Siemens SIMATIC 317TF-2 DP Getting Started

Automation system s7-300

Hide thumbs

Table Of Contents

Table of Contents

Configuration

4.2 Configuring the F-DI signal module

Step

Activity

Select the following settings in the fields:

CPU type: CPU317TF-2 DP

"Generate Technology System Data" option activated

"MPI/DP": New, type "MPI", transmission rate 1.5 Mbit/s or higher

"PG/PC": New, "Assign" option activated

If required, press the button "Help" to obtain additional information. Confirm with "OK".

Result: A new SIMATIC 300 station is created in the project with a CPU 317TF-2 DP (latest version).

Open the hardware configuration and add the following modules, as specified in the section "Requirements

(Page 7)":

Digital input module DI16xDC24V, e.g. 6ES7321-1BH02-0AA0



Digital output module DO16xDC24V/0.5A, e.g. 6ES7322-1BH01-0AA0



Save and compile the hardware configuration.

The system compiles your project, and adds the "Technology Objects" object to the project window in

SIMATIC Manager.

Download the hardware configuration to the target system.

4.2

Configuring the F-DI signal module

Use of the fail-safe input channels

Configure a fail-safe F-DI signal module. The following table shows which safety elements

need to be connected to the individual channels and how the channels need to be

configured.

Note

You must set a password to provide access permission for the safety program.

Table 4- 1

Channel

0 and 12

1 and 13

2 and 14

Configuration of the input channels, supply group 1Vs / 3Vs

Use

1. of the safety door, 2-

channel

2. of the safety door, 2-

channel

Emergency stop

switch, 2-channel

Key switch for setup

mode, single-channel

Acknowledgment

button, single-channel

Parameter

Evaluation of encoder