Wire) - Siemens SIMATIC S7-400 CP 440 Installation And Parameter Assignment

Cable for X 27 (S7/M7 (CP 440) - CP 340/CP 341/CP 440/CP 441)
The figure below illustrates the cable for a point-to-point connection between a CP 440 and a
CP 340/CP 341/CP 440/CP 441 for RS 422 operation.
For the cables you require the following male connectors:
● At the CP 440 side: 15-pin subminiature D male with screw interlock
● At communication partner: 15-pin subminiature D male with screw interlock
Figure B-1
Note
This cable type can be used in the following lengths for the CP 440 as communication
partner: max. 1200 m at 19 200 Baud, max. 500 m at 38 400 Baud max., max. 200 m at
115 200 Baud
Point-to-point connection CP 440 Installation and Parameter Assignment
Manual, 09/2007, A5E00057742-03
www.gkbpx.com
X27 Cable for CP 440 - CP 340/CP 341/CP 440/CP 441 for RS 422 Operation (Four-

Wire)

该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Cables
B.2 Cables
145