3.
Connect the front panel I/O cable assembly cables to the system board as shown in the following
figure.
Figure 5-19
Table 5-5
panel I/O cable assembly cables
Item
1
2
3
4.
Reconnect the speaker cable (see
that secure the front panel I/O cables to the chassis.
5.
Reinstall all removed components and reconnect any cables that have been disconnected.
ENWW
Connecting the front panel I/O cable assembly cables
Connecting the front
Description
Front audio
Front 1394a
Front USB
Installing the speaker on page 88
), and replace the tie wraps
Removing and installing components
95