Installing The Dimm - HP Z800 Maintenance And Service Manual

Dual processor configuration
The illustration below shows the DIMM installation order for a dual processor workstation.
Figure 5-90

Installing the DIMM

NOTE:
For best performance add DIMMs of the same size in pairs across CPUs.
1.
Disconnect power from the workstation (see
2. Remove the side access panel (see
3. Remove the airflow guide (see
4. Remove the memory fans (see
162 Chapter 5 Replacing components
Dual-processor DIMM installation order
Removing the airflow guide on page
Removing the memory fans on page
Predisassembly procedures on page
Removing the side access panel on page
77).
79).
80).
155).
ENWW