Deleting A Power-On Or Setup Password; National Keyboard Delimiter Characters - HP Z800 Maintenance And Service Manual

Deleting a power-on or setup password

To delete a power-on or setup password:
1.
Power on or restart the workstation.
2. Choose from the following:
To delete the power-on password, go to step 4.
●
To delete the setup password, as soon as the workstation is powered on, press and hold
●
until you enter the Computer Setup (F10) Utility. Press
necessary.
If you do not press F10 at the appropriate time, you must restart the workstation and then
press and hold F10 again to access the utility.
Use the appropriate operating system shutdown process.
3. When the key icon appears, enter the current password followed by a slash (/) or alternative
delimiter character: current password/.
For information about the alternative delimiter characters see
characters on page
4. Press

National keyboard delimiter characters

Each keyboard meets country-specific requirements. The syntax and keys you use for changing or
deleting passwords depend on the keyboard included with the workstation.
Table 4-3
Language
Arabic
Belgian
BHCSY
*
Brazilian
Chinese
Czech
Danish
French
French
Canadian
German
Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia
*
60 Chapter 4 System management
60.
Enter.
National keyboard delimiter characters
Delimiter Language
/ Greek
= Hebrew
- Hungarian
/ Italian
/ Japanese
- Korean
- Latin American
! Norwegian
é Polish
- Portuguese
Enter
National keyboard delimiter
Delimiter Language
- Russian
. Slovakian
- Spanish
- Swedish/Finnish
/ Swiss
/ Taiwanese
- Thai
- Turkish
- U.K. English
- U.S. English
to bypass the title screen, if
Delimiter
/
-
-
/
-
/
/
.
/
/
F10
ENWW