Mac Address-Table Static Drop - Cisco Catalyst 3750 Command Reference Manual

mac address-table static drop

Examples
This example shows how to enable unicast MAC address filtering and to configure the switch to drop
packets that have a source or destination address of c2f3.220a.12f4. When a packet is received in
VLAN 4 with this MAC address as its source or destination, the packet is dropped:
Switch(config)# mac address-table static c2f3.220a.12f4 vlan 4 drop
This example shows how to disable unicast MAC address filtering:
Switch(config)# no mac address-table static c2f3.220a.12f4 vlan 4
You can verify your setting by entering the show mac address-table static privileged EXEC command.
Related Commands Command
show mac address-table static
Catalyst 3750 Switch Command Reference
2-178
Chapter 2
Description
Displays only static MAC address table entries.
Catalyst 3750 Switch Cisco IOS Commands
78-16181-03