mls qos rewrite ip dscp
Examples
This example shows how to enable DSCP transparency and configure the switch to not change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# no mls qos rewrite ip dscp
This example shows how to disable DSCP transparency and configure the switch to change the DSCP
value of the incoming IP packet:
Switch(config)# mls qos
Switch(config)# mls qos rewrite ip dscp
You can verify your settings by entering the show running config | include rewrite privileged EXEC
command.
Related Commands
Command
mls qos
show running-config |
include rewrite
Catalyst 3750 Switch Command Reference
2-212
Description
Enables QoS globally.
Displays the DSCP transparency setting. For syntax information, select
Cisco IOS Release 12.2 Configuration Guides and Command
References > Cisco IOS Fundamentals Command Reference, Release
12.2 > File Management Commands > Configuration File Management
Commands.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
78-16181-03