ip arp inspection filter vlan
Examples
This example shows how to apply the ARP ACL static-hosts to VLAN 1 for dynamic ARP inspection:
Switch(config)# ip arp inspection filter static-hosts vlan 1
You can verify your settings by entering the show ip arp inspection vlan 1 privileged EXEC command.
Related Commands
Command
arp access-list
deny (ARP access-list
configuration)
permit (ARP
access-list
configuration)
show arp access-list
show ip arp inspection
vlan vlan-range
Catalyst 3750 Switch Command Reference
2-118
Description
Defines an ARP ACL.
Denies an ARP packet based on matches against the DHCP bindings.
Permits an ARP packet based on matches against the DHCP bindings.
Displays detailed information about ARP access lists.
Displays the configuration and the operating state of dynamic ARP
inspection for the specified VLAN.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
78-16181-03