Cisco Catalyst 3750 Command Reference Manual page 312

sdm prefer
Table 2-15 Approximate Number of Feature Resources Allowed by Each Template (continued)
Resource
Security ACEs
Layer 2 VLANs
Examples
This example shows how to configure the routing template on a desktop switch:
Switch(config)# sdm prefer routing
Switch(config)# exit
Switch# reload
This example shows how to configure the desktop routing template on an aggregator switch:
Switch(config)# sdm prefer routing desktop
Switch(config)# exit
Switch# reload
This example shows how to change a switch template to the default template. On an aggregator switch,
this is the default aggregator template; on a desktop switch, this is the default desktop template.
Switch(config)# no sdm prefer
Switch(config)# exit
Switch# reload
This example shows how to configure the desktop default template on an aggregator switch:
Switch(config)# sdm prefer default desktop
Switch(config)# exit
Switch# reload
You can verify your settings by entering the show sdm prefer privileged EXEC command.
Related Commands Command
show sdm prefer
Catalyst 3750 Switch Command Reference
2-284
Desktop Templates
Default Routing
1 K 1 K
1 K 1 K
Description
Displays the current SDM template in use or displays the templates that can
be used, with approximate resource allocation per feature.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Aggregator Templates
VLAN Default
1 K 1 K
1 K 1 K
Routing VLAN
1 K 1 K
1 K 1 K
78-16181-03