Cisco Catalyst 3750 Command Reference Manual page 291

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
This example shows how to disable powered-device detection and to not power a PoE port:
Switch(config)# interface fastethernet1/0/2
Switch(config-if)# power inline never
You can verify your settings by entering the show power inline user EXEC command.
Related Commands Command
logging event
power-inline-status
show controllers
power inline
show power inline
78-16181-03
Description
Enables the logging of PoE events.
Displays the values in the registers of the specified PoE controller.
Displays the PoE status for the specified PoE port or for all PoE ports.
Catalyst 3750 Switch Command Reference
power inline
2-263