Archive Tar - Cisco Catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
/table source-url
/xtract source-url
flash:/file-url [dir/file...]
Defaults None
Command Modes
Privileged EXEC
Command History Release
12.1(11)AX
Usage Guidelines
Filenames and directory names are case sensitive.
Image names are case sensitive.
78-16181-03
Display the contents of an existing tar file to the screen.
For source-url, specify the source URL alias for the local or network file
system. These options are supported:
The syntax for the local flash file system:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/tar-filename.tar
The syntax for the RCP:
•
rcp:[[//username@location]/directory]/tar-filename.tar
The syntax for the TFTP:
•
tftp:[[//location]/directory]/tar-filename.tar
The tar-filename.tar is the tar file to display.
Extract files from a tar file to the local file system.
For source-url, specify the source URL alias for the local file system.
These options are supported:
The syntax for the local flash file system:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/tar-filename.tar
The syntax for the RCP:
•
rcp:[[//username@location]/directory]/tar-filename.tar
The syntax for the TFTP:
•
tftp:[[//location]/directory]/tar-filename.tar
The tar-filename.tar is the tar file from which to extract.
For flash:/file-url [dir/file...], specify the location on the local flash file
system into which the tar file is extracted. Use the dir/file... option to
specify an optional list of files or directories within the tar file to be
extracted. If none are specified, all files and directories are extracted.
Modification
This command was introduced.
Catalyst 3750 Switch Command Reference

archive tar

2-15