vtp (VLAN configuration)
This example shows how to enable pruning in the proposed new VLAN database:
Switch(vlan)# vtp pruning
Pruning switched ON
This example shows how to enable v2 mode in the proposed new VLAN database:
Switch(vlan)# vtp v2-mode
V2 mode enabled.
You can verify your settings by entering the show vtp status privileged EXEC command.
Related Commands
Command
show vtp
switchport trunk
pruning
vtp (global
configuration)
Catalyst 3750 Switch Command Reference
2-642
Description
status
Displays the VTP statistics for the switch and general information about the
VTP management domain status.
Configures the VLAN pruning-eligible list for ports in trunking mode.
Configures the VTP filename, interface, domain name, and mode.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-03