Rmon Collection Stats - Cisco Catalyst 3750 Command Reference Manual

2 ]
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

rmon collection stats

Use the rmon collection stats interface configuration command on the switch stack or on a standalone
switch to collect Ethernet group statistics, which include usage statistics about broadcast and multicast
packets, and error statistics about cyclic redundancy check (CRC) alignment errors and collisions. Use
the no form of this command to return to the default setting.
Syntax Description index
owner name
Defaults
The RMON statistics collection is disabled.
Command Modes Interface configuration
Command History Release
12.1(11)AX
Usage Guidelines The RMON statistics collection command is based on hardware counters.
Examples
This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your setting by entering the show rmon statistics privileged EXEC command.
Related Commands Command
show rmon statistics
78-16181-03
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Remote Network Monitoring (RMON) collection control index. The range is
1 to 65535.
(Optional) Owner of the RMON collection.
Modification
This command was introduced.
Description
Displays RMON statistics.
For syntax information, select Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2 > System
Management Commands > RMON Commands.
Catalyst 3750 Switch Command Reference
rmon collection stats
2-281