Archive Download-Sw - Cisco Catalyst 3750 Command Reference Manual

archive download-sw

archive download-sw
Use the archive download-sw privileged EXEC command on the switch stack or on a standalone switch
to download a new image from a TFTP server to the switch or switch stack and to overwrite or keep the
existing image.
Syntax Description /force-reload
/imageonly
/leave-old-sw
/no-set-boot
/no-version-check
/destination-system
stack-member-number
/only-system-type
system-type
/overwrite
/reload
Catalyst 3750 Switch Command Reference
2-10
archive download-sw {/force-reload | /imageonly | /leave-old-sw | /no-set-boot |
/no-version-check | /destination-system stack-member-number | /only-system-type
system-type | /overwrite | /reload | /safe} source-url
Unconditionally force a system reload after successfully downloading the
software image.
Download only the software image but not the HTML files associated with
the embedded device manager. The HTML files for the existing version are
deleted only if the existing version is being overwritten or removed.
Keep the old software version after a successful download.
Do not alter the setting of the BOOT environment variable to point to the new
software image after it is successfully downloaded.
Download the software image without checking the compatibility of the
stack protocol version on the image and on the switch stack.
Specify the specific stack member to be upgraded. The range is 1 to 9.
Specify the specific system type to be upgraded. The range is 0 to
FFFFFFFF.
Overwrite the software image in flash memory with the downloaded one.
Reload the system after successfully downloading the image unless the
configuration has been changed and not been saved.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-03