Show Platform Ip Unicast - Cisco Catalyst 3750 Command Reference Manual

Appendix C Catalyst 3750 Switch Show Platform Commands

show platform ip unicast

Use the show platform ip unicast privileged EXEC command to display platform-dependent IP unicast
routing information.
Syntax Description adjacency
cef-idb
counts
dhcp
failed {adjacency |
arp [A.B.C.D] | route}
mpaths
route
standby
statistics
trace
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)AX
78-16181-03
show platform ip unicast {adjacency | cef-idb | counts | dhcp | failed {adjacency | arp [A.B.C.D]
| route} | mpaths | route | standby | statistics | trace} [ | {begin | exclude | include}
expression]
Display the platform adjacency database.
Display platform information corresponding to Cisco Express Forwarding
(CEF) interface descriptor block.
Display the current counts for the Layer 3 unicast databases.
Display the DHCP system dynamic addresses.
Display the hardware resource failures. The keywords have these meanings:
adjacency—Display the adjacency entries that failed to be programmed
•
in hardware.
arp—Display the Address Resolution Protocol (ARP) deletions because
•
of failure and because of retries.
A.B.C.D—(Optional) Prefix of the ARP entries to display.
•
route—Display the route entries that failed to be programmed in
•
hardware.
Display the Layer 3 unicast routing multipath adjacency database.
Display the platform route database.
Display the platform standby information.
Display the Layer 3 unicast routing accumulated statistics.
Display the platform event trace logs.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform ip unicast
Catalyst 3750 Switch Command Reference
C-11