Cisco Catalyst 3750 Command Reference Manual page 418

show ipc
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use
Message cache size
Maximum message cache usage
0 times message cache crossed
Emergency messages currently in use
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID
10000.7
10000.8
Rx Sessions:
Port ID
10000.7
10000.8
This example shows how to display the status of the local IPC server:
Switch> show ipc status cumulative
Time last IPC stat cleared :never
This processor is the IPC master server.
Do not drop output of IPC frames for test purposes.
1000 IPC Message Headers Cached.
Total Frames
Total from Local Ports
Total Protocol Control Frames
Total Frames Dropped
Catalyst 3750 Switch Command Reference
2-390
Type Name
Unicast MDFS RP:Statistics
port_index = 0 type = Unreliable
Msgs requested = 180 Msgs returned = 180
Unicast Slot 1 :MDFS.control.RIL
port_index = 0 type = Reliable
Msgs requested = 0 Msgs returned = 0
Type Name
Unicast MDFS RP:Statistics
port_index = 0 seat_id = 0x10000
No of msgs requested = 180
Unicast Slot 1 :MDFS.control.RIL
port_index = 0 seat_id = 0x10000
No of msgs requested = 0
IPC System Status
0 0
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
:
:
:
5000 [max]
:
last sent = 0
last sent = 0
last sent = 0
Msgs returned = 180
last sent = 0
Msgs returned = 0
Service Usage
3
1000
1000
0
last heard = 0
last heard = 0
last heard = 0
last heard = 0
Rx Side Tx Side
12916 608
13080 574
116 17
0 0
78-16181-03