Cisco Catalyst 3750 Command Reference Manual page 644

vlan (VLAN configuration)
media {ethernet | fddi |
fd-net | tokenring | tr-net}
mtu mtu-size
name vlan-name
parent parent-vlan-id
ring ring-number
said said-value
state {suspend | active}
ste ste-number
stp type {ieee | ibm | auto}
tb-vlan1 tb-vlan1-id
and tb-vlan2 tb-vlan2-id
Table 2-38
Catalyst 3750 Switch Command Reference
2-616
(Optional) Specify the VLAN media type.
syntax for each media type.
ethernet is Ethernet media type (the default).
•
fddi is FDDI media type.
•
fd-net is FDDI network entity title (NET) media type.
•
tokenring is Token Ring media type if the VTP v2 mode is
•
disabled, or TrCRF if the VTP v2 mode is enabled.
tr-net is Token Ring network entity title (NET) media type if the
•
VTP v2 mode is disabled or TrBRF media type if the VTP v2 mode
is enabled.
(Optional) Specify the maximum transmission unit (MTU) (packet size
in bytes). The range is 1500 to 18190.
(Optional) Specify the VLAN name, an ASCII string from 1 to 32
characters that must be unique within the administrative domain.
(Optional) Specify the parent VLAN of an existing FDDI, Token Ring,
or TrCRF VLAN. This parameter identifies the TrBRF to which a
TrCRF belongs and is required when defining a TrCRF. The range is 0
to 1005.
(Optional) Specify the logical ring for an FDDI, Token Ring, or TrCRF
VLAN. The range is 1 to 4095.
(Optional) Enter the security association identifier (SAID) as
documented in IEEE 802.10. The range is 1 to 4294967294, and the
number must be unique within the administrative domain.
(Optional) Specify the VLAN state:
If active, the VLAN is operational.
•
If suspend, the VLAN is suspended. Suspended VLANs do not
•
pass packets.
(Optional) Specify the maximum number of spanning-tree explorer
(STE) hops. This keyword applies only to TrCRF VLANs. The range is
0 to 13.
(Optional) Specify the spanning-tree type for FDDI-NET, Token
Ring-NET, or TrBRF VLAN.
ieee for IEEE Ethernet STP running source-route transparent
•
(SRT) bridging.
ibm for IBM STP running source-route bridging (SRB).
•
auto for STP running a combination of source-route transparent
•
bridging (IEEE) and source-route bridging (IBM).
(Optional) Specify the first and second VLAN to which this VLAN is
translationally bridged. Translational VLANs translate FDDI or Token
Ring to Ethernet, for example. The range is 0 to 1005. Zero is assumed
if no value is specified.
shows the valid syntax options for different media types.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Table 2-38 lists the valid
78-16181-03