Cisco Catalyst 3750 Command Reference Manual page 481

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Fa1/0/7
<output truncated>
This is an example of output from the show power inline command on a port:
Switch> show power inline fastethernet2/0/1
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Fa2/0/1
This is an example of output from the show power inline module switch-number command on stack
member 1:
Switch> show power inline module 1
Module
------
1
Interface Admin
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/1
Fa1/0/2
Fa1/0/3
Fa1/0/4
Fa1/0/5
Fa1/0/6
<output truncated>
Table 2-28 show power inline interface Field Descriptions
Field
Admin
Oper
Power
Device
Class
Available
Used
Remaining
78-16181-03
auto on 6.3
Oper Power
(Watts)
auto on 6.3
Available Used
(Watts) (Watts)
--------- --------
370.0 166.2
Oper Power
(Watts)
auto on 6.3
auto on 6.3
auto on 6.3
auto on 6.3
auto on 6.3
auto on 6.3
Description
Administration mode: auto, off, static
Operating mode:
on—the powered device is detected, and power is applied.
•
• off—no PoE is applied.
• faulty—device detection or a powered device is in a faulty state.
• power-deny—a powered device is detected, but no PoE is available, or the
maximum wattage exceeds the detected powered-device maximum.
The supplied PoE in watts
The device type detected: n/a, unknown, Cisco powered-device, IEEE
powered-device, <name from CDP>
The IEEE classification: n/a, Class <0–4>
The total amount of PoE in the system
The amount of PoE allocated to ports
The amount of PoE not allocated to ports in the system. (Available – Used =
Remaining)
IP Phone 7910
Device
IP Phone 7910
Remaining
(Watts)
---------
203.9
Device
IP Phone 7910
IP Phone 7910
IP Phone 7910
IP Phone 7910
IP Phone 7910
IP Phone 7910
Catalyst 3750 Switch Command Reference
show power inline
n/a 15.4
Class Max
n/a 15.4
Class Max
n/a 15.4
n/a 15.4
n/a 15.4
n/a 15.4
n/a 15.4
n/a 15.4
2-453