Show Sdm Prefer - Cisco Catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

show sdm prefer

Use the show sdm prefer privileged EXEC command to display information about the Switch Database
Management (SDM) templates that can be used to maximize used for allocating system resources for a
particular feature, or use the command without a keyword to display the template in use.
Syntax Description default
routing
vlan
desktop
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.1(11)AX
12.1(14)EA1
Usage Guidelines
When you change the SDM template by using the sdm prefer global configuration command, you must
reload the switch for the configuration to take effect. If you enter the show sdm prefer command before
you enter the reload privileged EXEC command, the show sdm prefer command shows the template
currently in use and the template that will become active after a reload.
The numbers displayed for each template represent an approximate maximum number for each feature
resource. The actual number might vary, depending on the actual number of other features configured.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show sdm prefer command, displaying the template in use:
Switch# show sdm prefer
The current template is "desktop default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
78-16181-03
show sdm prefer [default | routing | vlan [desktop]] [| {begin | exclude | include} expression]
(Optional) Display the template that balances system resources among
features.
(Optional) Display the template that maximizes system resources for routing.
(Optional) Display the template that maximizes system resources for Layer 2
VLANs.
(Optional) For Catalyst 3750-12S aggregator switches only, display the
desktop templates. For this switch, when you do not enter the desktop
keyword, the aggregator templates appear.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The desktop keyword was added.
Catalyst 3750 Switch Command Reference
show sdm prefer
2-455