Chapter 3 — Use the Scanner
Enable Symbology Decoding
38
Before you start reading bar codes, use the Settings app to enable
decoding for only the bar code symbologies you need to read.
1 Start the Settings app.
2 In the Intermec section, tap Scanners > Internal Scanners >
Symbologies.
By default, decoding is enabled for these symbologies:
•
Code 128 and GS1-128
•
Code 39
•
Datamatrix
•
UPC-A, UPC-E, EAN-8, and UPC-E1
•
PDF417
3 To enable decoding for a symbology type, slide the switch on.
To disable decoding, slide the switch off.
CN51 Mobile Computer User Manual