Matrix 2 Of 5 Settings - Intermec CN51 User Manual

CN51 Mobile Computer User Manual
Japan Post Settings and Descriptions (Continued)
Setting
Code mark

Matrix 2 of 5 Settings

This section lists all the configurable settings for decoding the Matrix
2 of 5 symbology.
Matrix 2 of 5 Settings and Descriptions
Settings
Start/Stop
User defined symbology ID
Code mark
Matrix 2 of 5 Length Mode Settings and Descriptions
Setting
Mode
Length 1
Description
A one-character code mark that serves as
an identifier for Japan Post.
Default is *.
Descriptions
Enables or disables a special bar code
character that provides the scanner with
start and stop reading instructions.
Options include:
•
Regular (default)
•
ChinaPost
Sets the symbology ID for Matrix 2 of 5.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is B4.
A one-character code mark that serves as
an identifier for Matrix 2 of 5.
Default is D.
Description
Sets the length mode for Matrix 2 of 5 decoding.
Options include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 6.
Chapter 3 — Use the Scanner
63