Record A Video; Change Video Settings - Intermec CN51 User Manual

Chapter 5 — Use the Camera

Record a Video

Change Video Settings

94
This section explains how to record video with the camera in the
computer.
1 In the All Apps screen, tap Camera
2 Tap .
3 Tap to begin recording video. To zoom in or out, drag the slider
at the bottom of the viewfinder.
4 When you are done recording, tap
You can change the camera settings for best results when recording
video.
1 In the All Apps screen, tap Camera
2 Tap .
3 Tap to enable or disable location data. To enable Store Location,
slide the switch on. When Store Location is enabled, location data
is saved with the file.
4 Tap the current video quality setting (1080p, 720p, or 480p) to
change the video quality. Default is 720p.
5 To change the time lapse interval between images in the video,
tap . Default is Off (no time lapse between images).
6 To change the background effects, tap
from the list.
7 To set the white balance, tap
Default is Auto.
8 To set the flash mode, tap
Default is Auto.
.
.
.
and select an option
and select a value from the list.
and select an option from the list.
CN51 Mobile Computer User Manual