Telepen Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
72

Telepen Settings

This section lists all the configurable settings for decoding the Telepen
symbology.
Telepen Settings and Descriptions
Setting
Format
User defined symbology ID
Code mark
Telepen Length Mode Settings and Descriptions
Setting
Mode
Length 1
Length 2
Length 3
Description
Sets the format. Options include:
•
ASCII (default)
•
Numeric: Must be an even number of
digits
Sets the symbology ID for Telepen. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is C6.
A one-character code mark that serves as
an identifier for telepen.
Default is *.
Description
Sets the length mode for Telepen decoding. Options
include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
CN51 Mobile Computer User Manual