CN51 Mobile Computer User Manual
Code 11 Length Mode Settings and Descriptions
Setting
Length Mode
Length 1
Length 2
Length 3
Code 39 Settings
This topic lists all settings for decoding the Code 39 symbology.
Code 39 Settings and Descriptions
Setting
Full ASCII conversion Enables or disables full ASCII conversion. Default is
Start/stop
transmission
Start character
Verify check digit
Description
Sets the length mode for decoding. Options include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 4.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Description
disabled.
Enables or disables a special bar code character that
provides the scanner with start and stop reading
instructions as well as a scanning direction
indicator. Default is disabled.
Sets the start character to $ only, *only, or both $
and *. Default is *.
Sets the check digit for a higher level of security. The
check character is positioned between the final data
character and the stop character. Options include:
•
Disable (default)
•
Modulo 43
•
French CIP
•
Italian CPI
•
HIBC
•
AIAG
Chapter 3 — Use the Scanner
49