Codablock A Settings - Intermec CN51 User Manual

CN51 Mobile Computer User Manual
Codabar Length Mode Settings and Descriptions
Setting
Mode
Length 1
Length 2
Length 3

Codablock A Settings

This section lists all configurable settings for decoding the Codablock
A symbology.
Codablock A Settings and Descriptions
Setting
User defined symbology ID
Code mark
Description
Sets the length mode for Codabar decoding.
Options include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 6.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Description
Sets the symbology ID for Codablock A.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is K0.
A one-character code mark that serves as
an identifier for Codablock A.
Default is *.
Chapter 3 — Use the Scanner
47