Msi Settings - Intermec CN51 User Manual

CN51 Mobile Computer User Manual
Micro PDF417 Settings and Descriptions (Continued)
Setting
Code mark

MSI Settings

This section lists all configurable settings for decoding the MSI
symbology.
MSI Settings and Descriptions
Setting
Verify check digit
Transmit check digit
User defined symbology ID
Code mark
MSI Length Mode Settings and Descriptions
Setting
Mode
Description
A one-character code mark that serves as
an identifier for Micro PDF417.
Default is *.
Description
Sets the check digit type. Options
include:
•
Modulo 10
•
Double Modulo 10 (default)
Enables or disables transmission of the
check digit as part of the bar code data.
Default is disabled.
Sets the symbology ID for MSI. Range is 1
to 4 ASCII characters. \xFF is not
supported.
Default is B8.
A one-character code mark that serves as
an identifier for MSI.
Default is D.
Description
Sets the length mode for MSI decoding. Options
include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Chapter 3 — Use the Scanner
65