Postnet Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
68
Plessey Settings and Descriptions (Continued)
Setting
Code mark
Plessey Length Mode Settings and Descriptions
Setting
Mode
Length 1
Length 2
Length 3

Postnet Settings

This section lists all configurable settings for decoding the Postnet
symbology.
Postnet Settings and Descriptions
Setting
Transmit check digit
User defined symbology ID
Description
A one-character code mark that serves as
an identifier for Plessey.
Default is D.
Description
Sets the length mode for Plessey decoding. Options
include:
•
Length 1 minimum (default)
•
Lengths 1,2,3 fixed
•
Length 1 minimum, length 2 maximum
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Description
Enables or disables check digit
transmission.
Default is enabled.
Sets the symbology ID for Postnet. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is P0.
CN51 Mobile Computer User Manual