Perform A Factory Data Reset; Clean The Computer - Intermec CN51 User Manual

Chapter 8 — Troubleshoot and Maintain the Computer

Perform a Factory Data Reset

Clean the Computer

128
Caution: Performing a factory data reset completely erases all
data, files, and downloaded apps from the computer memory.
Back up your data and files before proceeding.
You can perform a factory data reset, which restores all default settings
on the computer and erases all data, files, and downloaded apps.
1 Start the Settings app and tap Backup & reset > Factory data
reset.
2 Tap Reset phone. A confirming message appears, reminding you
that you cannot reverse this action.
3 Tap Erase everything. The computer restarts and all user data,
files, and downloaded apps are erased.
To keep the computer in good working order, you may need to clean
the scanner window, color camera window, and the touch screen.
Clean the windows and the touch screen as often as needed for the
environment in which you are using the computer. To clean the
computer, use one of these recommended cleaning agents:
• Acetic acid, 10% in water
• Ethyl alcohol, 10% in water
Mild soap solutions
•
• 5% to no more than 10% bleach or sodium hypochlorite with water
Caution: There are no user-serviceable parts inside the computer.
Opening the computer will void the warranty and may cause
damage to the internal components.
Note: Intermec recommends that you leave the battery installed when
you clean the computer as described. Leaving the battery installed
helps prevent fluids from entering the computer through the SIM card
and microSD card connectors.
CN51 Mobile Computer User Manual