Maxicode Settings; Micro Pdf417 Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
64
Matrix 2 of 5 Length Mode Settings and Descriptions (Continued)
Setting
Length 2
Length 3

Maxicode Settings

This section lists all configurable settings for decoding the Maxicode
symbology.
Maxicode Settings and Descriptions
Setting
Mode 0
User defined symbology ID
Code mark

Micro PDF417 Settings

This section lists all configurable settings for decoding the Micro
PDF417 symbology.
Micro PDF417 Settings and Descriptions
Setting
Code 128 emulation
User defined symbology ID
Description
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Description
Enables or disables Mode 0 for Maxicode.
Default is disabled.
Sets the symbology ID for Maxicode.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is D2.
A one-character code mark that serves as
an identifier for Dutch Post.
Default is *.
Description
Enables or disables Code 128 emulation
for Micro PDF417.
Default is disabled.
Sets the symbology ID for Micro PDF417.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is C7.
CN51 Mobile Computer User Manual