Load A Certificate; Disable Or Remove Certificates - Intermec CN51 User Manual

CN51 Mobile Computer User Manual

Load a Certificate

To use a certificate, you must install it in the trusted credential storage
on the computer.
1 Copy the certificate or key store from your PC to a microSD card.
2 Install the microSD card in the computer and turn the computer
on.
3 Start the Settings app and tap Security > Install from SD card.
4 Tap the name of the certificate or key store to install it. If
prompted, enter the key store password and tap OK.
5 Enter a name for the certificate and tap OK.
Note: Apps such as Email and Browser that support certificates allow
you to install certificates directly from within the app. For more
information, see the Help that comes with the app.

Disable or Remove Certificates

If a certificate is compromised, or your organization chooses not to
trust it, you can disable or remove it.
1 Start the Settings app and tap Security > Trusted credentials.
The trusted credentials screen has two tabs:
• System shows CA certificates that are installed in the ROM.
• User shows CA certificates you have installed yourself.
2 Tap the name of the certificate to disable or remove. The certificate
details screen appears.
3 Scroll to the bottom of the details screen and tap Disable (for
System certificates) or Remove (for User certificates).
Note: If necessary, you can enable a disabled System certificate from
this location. If you remove a User certificate, you must install it again
to enable it.
4 Tap OK.
Chapter 6 — Configure the Computer
105