Australia Post Settings; Aztec Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
44

Australia Post Settings

This section lists all configurable settings for decoding the Australia
Post symbology.
Australia Post Settings and Descriptions
Setting
User defined symbology ID
Code mark

Aztec Settings

This section lists all configurable settings for decoding the Aztec
symbology.
Aztec Settings and Descriptions
Setting
Structured append mode
Runes
GS1-128 emulation
User defined symbology ID
Code mark
Description
Sets the symbology ID for Australia Post.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is P3.
A one-character code mark that serves as
an identifier for Australia Post. Default is
*.
Description
Enables or disables Aztec structure
append mode. Default is disabled.
Enables or disables Aztec Runes, which
are special Aztec symbols. Default is
disabled.
Enables or disables GS1-128 emulation.
Default is disabled.
Sets the symbology ID for Aztec. Range is
1 to 4 ASCII characters. \xFF is not
supported.
Default is D3.
A one-character code mark that serves as
an identifier for Aztec. Default is *.
CN51 Mobile Computer User Manual