Intermec CN51 User Manual page 68

Chapter 3 — Use the Scanner
56
UPC-E Options
Setting
Number system
transmission
Check digit
User defined
symbology ID
Code mark
EAN-8 Options
Setting
Check digit
User defined
symbology ID
Code mark
EAN-13 Options
Setting
Check digit
ISBN conversion
ISMN conversion
ISSN conversion
Description
Enables or disables transmission of the UPC-E
number system character. Default is enabled.
Enables or disables reading the check digit. Default
is enabled.
Sets the symbology ID for UPC-E. Range is 1 to 4
ASCII characters. \xFF is not supported.
Default is E0.
A one-character code mark that serves as an
identifier for UPC-E. Default is E.
Description
Enables or disables reading the check digit. Default
is enabled.
Sets the symbology ID for EAN-8. Range is 1 to 4
ASCII characters. \xFF is not supported.
Default is FF.
A one-character code mark that serves as an
identifier for EAN-8. Default is N.
Description
Enables or disables reading the check digit. Default
is enabled.
Enables or disables conversion of EAN-13 data to
ISBN format. Default is disabled.
Enables or disables conversion of EAN-13 data to
ISMN format. Default is disabled.
Enables or disables conversion of EAN-13 data to
ISSN format. Default is disabled.
CN51 Mobile Computer User Manual