Gs1 Composite Settings - Intermec CN51 User Manual

CN51 Mobile Computer User Manual
EAN-13 Options (Continued)
Setting
User defined
symbology ID
Code mark

GS1 Composite Settings

This section lists all configurable settings for decoding the GS1
Composite symbology.
GS1 Composite Settings and Descriptions
Setting
GS1-128 emulation
Linear only transmit mode
EAN/UPC comp message decode Determines how to decode the two parts
Unconventional GS1 Composite Enables or disables decoding of
Description
Sets the symbology ID for EAN-13. Range is 1 to 4
ASCII characters. \xFF is not supported.
Default is F.
A one-character code mark that serves as an
identifier for EAN-13. Default is F.
Description
Enables or disables transmission of data
encoded in the Composite symbol as if
the data were encoded in one or more
GS1 Composite/GS1-128 symbols.
Default is disabled.
Enables or disables transmission of only
the linear portion of the GS1 composite
bar code.
Default is disabled.
of the GS1 Composite bar code. Options
include:
•
Never linked
•
Always linked
•
Auto-discriminate
Unconventional GS1 Composite.
Default is disabled.
Chapter 3 — Use the Scanner
57