How To Enable The Integrated Gps On The Cs40 - Intermec CS40 User Manual

Hide thumbs Also See for CS40:

Table of Contents

Chapter 1 — Using the CS40

How to Enable the Integrated GPS on the CS40

4 Slide the microSD card door to the left to unlock it and open the

door.

5 Slide the microSD card into place.

6 Close the microSD card door and slide it to the right to lock it in

place.

7 Close the card access door.

8 Install the battery.

9 Press the Power button. The CS40 cold boots.

The CS40 comes equipped with an integrated Global Positioning

System (GPS) receiver. It can deliver standards-based National Marine

Electronics Association (NMEA) data strings to GPS applications.

Intermec recommends that you use the GPS Intermediate Driver

(GPSID) instead of directly accessing the GPS hardware. The GPSID

is a Microsoft software component that interacts between

applications and the GPS hardware.

Using the GPSID allows Intermec support for Extended Ephemeris,

which enhances GPS performance by:

•

reducing the amount of time it takes your GPS receiver to acquire

a fix.

•

eliminating the need to obtain precise satellite data information

from the GPS satellites.

CS40 Mobile Computer User's Manual

Table of Contents