Pdf417 Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
66
MSI Length Mode Settings and Descriptions (Continued)
Setting
Length 1
Length 2
Length 3

PDF417 Settings

This section lists all configurable settings for decoding the PDF417
symbology.
PDF417 Settings and Descriptions
Setting
PDF with data length ID = 0
User defined symbology ID
Code mark
Macro PDF417 Setting and Description
Setting
Transmit control header
Description
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 6.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Restricts the length of the bar code that the scanner
will read. Range is 0 to 255. Default is 0.
Description
Enables or disables Irregular PDF to read
bar codes with symbol length descriptor
set to 0.
Default is disabled.
Sets the symbology ID for PDF417. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is C7.
A one-character code mark that serves as
an identifier for PDF417.
Default is *.
Description
Enables or disables transmission of the
control header for Macro PDF417.
Default is disabled.
CN51 Mobile Computer User Manual