Intermec CN51 User Manual page 105

CN51 Mobile Computer User Manual
3 Tap to change basic camera settings:
• Store Location: Enable this feature to save location data for
each picture.
• Picture size: Sets the maximum size (in pixels or as a screen size)
of each image. Default is 5 MP.
• Metering modes: Sets how the camera measures the brightness
of the subject based on a specific region of the image, and
adjusts the exposure accordingly. Default is Center.
• Self-Timer: Sets the amount of time the camera waits to take
the picture after you press the . Default is Off (self-timer is
disabled).
• Multi shot: Sets the number of pictures the camera takes when
you press the shutter button. Default is Off (Multi shot is
disabled, and the camera takes only one picture at a time).
4 (Optional) To select a Scene, tap SCN. Scenes are preconfigured
sets of values for white balance and flash that are optimized for
specific environments:
• Auto
• Action
• Night
• Sunset
• Party
5 To set the exposure, tap
is 0.
6 To set the white balance, tap
Default is Auto.
7 To set the flash mode, tap
Default is Auto.
Chapter 5 — Use the Camera
and select a value from the list. Default
and select a value from the list.
and select an option from the list.
93