Enable Automatic Configuration Of Carrier Settings; Switch Carriers Using Intermec Settings - Intermec CN51 User Manual

Enable Automatic Configuration of Carrier Settings

Switch Carriers Using Intermec Settings

Document Title
If you plan to add a carrier, you should enable automatic
configuration of carrier settings before you activate the phone for the
new carrier. This feature is disabled by default.
If you plan to add another WAN radio network carrier, you should
enable automatic confguration of carrier settings before you activate
the phone for the new carrier.
Note: Your computer must have the software-defined radio to use this
feature.
1 Tap Start > Settings > System > Intermec Settings.
2 Tap Communications > WWAN > Carrier Settings Auto
Config.
3 Select Enabled and tap OK.
Use Intermec Settings to quickly change your WAN radio network
carrier.
Note:Your computer must have the software-defined radio to switch
carriers using this method.
1 Tap Start > Settings > System > Intermec Settings >
Communications > WWAN > Carrier Choice.
2 Select a Carrier and tap OK.
If the update is successful, your new carrier appears in the WWAN
settings list.
If the update is unsuccessful, the carrier does not change.
3 Tap Ok to exit Intermec Settings.
DRAFT
Chapter 3 — Use the Phone
43