Bpo Settings; Canada Post Settings - Intermec CN51 User Manual

CN51 Mobile Computer User Manual

BPO Settings

This section lists all configurable settings for decoding the BPO
symbology.
BPO Settings and Descriptions
Setting
Transmit check digit
User defined symbology ID
Code mark

Canada Post Settings

This section lists all configurable settings for decoding the Canada
Post symbology.
Canada Post Settings and Descriptions
Setting
User defined symbology ID
Code mark
Chapter 3 — Use the Scanner
Description
Enables or disables sending the check
digit as part of the bar code data. Default
is enabled.
Sets the symbology ID for BPO. Range is
1 to 4 ASCII characters. \xFF is not
supported.
Default is P2.
A one-character code mark that serves as
an identifier for BPO. Default is *.
Description
Sets the symbology ID for BPO. Range is
1 to 4 ASCII characters. \xFF is not
supported.
Default is P6.
A one-character code mark that serves as
an identifier for BPO.
Default is *.
45