Exiting Intermec Settings; Restoring The Cn2 Default Settings - Intermec CN2 User Manual

Exiting Intermec Settings

When you are done modifying your device configuration and
have saved your settings, you should exit Intermec Settings.
To exit Intermec Settings
• Tap the
Or,
• From the Main Menu, tap File > Exit.
If you try to exit Intermec Settings without saving your changes,
a message box appears asking if you want to save your
configuration changes. Tap Yes.

Restoring the CN2 Default Settings

You can restore the CN2 to factory default settings.
Note: Restoring the CN2 to factory default settings resets all
network parameters. As a result, you may lose network
communications. This option should only be used by network
administrators or by Intermec support personnel.
For a complete list of the default settings, see "Default
Configuration" on page 108.
To restore default settings
1 Tap Start > Intermec Settings. The Intermec Settings
application appears.
2 Tap one of the menus:
• Scanners Symbologies
• Communications
• Device Settings
3 Tap Edit > Restore Item Defaults.
4 Tap Yes to restore all default settings.
5 Repeats Steps 2, 3, and 4 for the other two menus.
CN2 Handheld Computer User's Manual
Chapter 2 — Configuring the CN2
in the upper right corner of the window.
X
35