Upgrading The Cn2 - Intermec CN2 User Manual

Chapter 5 — Troubleshooting and Maintaining the CN2
2 Using the end of the stylus, press the Reset button on the
inside of the battery compartment.
Do not use force or a sharp object when pressing the
Reset button. You may damage the Reset button.
Attention: N'employez pas la force ou un objet pointu
quand appuyant sur le remettez à zéro le bouton. Vous
pouvez endommager le remettez à zéro le bouton.
3 Install the battery and battery door. After approximately 4
seconds, the CN2 starts the power on sequence.
4 The date and time settings are not saved through a cold boot.
You need to reset the time and date:
a Tap Start > Settings > Control Panel.
b Double-tap the Date/Time icon.
c Set the date and time.
d Tap OK to save the new time and date.
e Tap
f Tap

Upgrading the CN2

When you upgrade your CN2, you are updating these two
components:
• Operating system (OS)
• Persistent Storage Manager (PSM) files
96
Reset
button
X to exit Date/Time.
X to exit Control Panel.
CN2 Handheld Computer User's Manual