Using Leap Security - Intermec CN2 User Manual

Chapter 3 — Adding the CN2 to the Network
If you choose PEAP:
a Select Properties and tap Run App. The Authentication
b Select the Validate Server check box.
c Press Enter. Once the radio starts to authenticate, the
d Enter a User Name and Password and select the Save
e (Optional) In the Domain field, enter the domain.
f Press Enter.
9 For Network Key Setting, choose Automatic.
10 Exit Intermec Settings.

Using LEAP Security

Lightweight Extensible Authentication Protocol (LEAP), also
known as Cisco-Wireless EAP, provides username/password-
based authentication between a wireless client and a RADIUS
server. In the 802.1x framework, traffic cannot pass through an
Ethernet hub or wireless network access point until it
successfully authenticates itself.
The station must identify itself and prove that it is an authorized
user before it is actually allowed to use the LAN. LEAP also
delivers a session key to the authenticated station, so that future
frames can be encrypted with a key that is different than keys
used by others' sessions.
To use LEAP security, you need:
• a RADIUS server.
56
Settings box appears.
Network Password dialog box appears.
Password check box.
CN2 Handheld Computer User's Manual