Selecting Funk As Your Security Choice - Intermec CN2 User Manual

Chapter 3 — Adding the CN2 to the Network
• In addition to everything offered by Microsoft Security, Funk
Security offers you CCX v1.0 compliance and lets you use
LEAP and TTLS authentication on your CN2. If you choose
Funk security, follow the instructions in these sections:
• "Selecting Funk Security as Your Security Choice" in the
• "Selecting a Profile for Funk Security" on page 47
Note: If you choose Microsoft Security, you can use Microsoft
Wireless Zero Configuration. For details, see "Configuring the
CN2 for Microsoft Wireless Zero Configuration" on page 43.
Note: Your choice does not depend on your authentication
server. For example, you can choose Funk Security if you use
Microsoft Active Directory

Selecting Funk as Your Security Choice

The default security setting is Microsoft. If you want to use
Funk security, you need to select it as your security choice.
To select Funk security as your security choice
1 Tap the Start icon. The Start menu appears.
2 Tap Intermec Settings. The Intermec Settings application
appears.
3 Tap Communications > 802.11 Radio > Security Settings
> Security Choice.
4 From the Security Choice list, select Funk Security.
5 Tap the Save icon
appears telling you that you must save your settings and warm
boot the CN2 for your new security choice to take effect.
6 Tap OK to close the alert box.
7 Save your settings.
8 Warm boot your CN2 by pressing and holding the Power
key for approximately 10 seconds.
46
next section
®
to issue certificates.
at the top of the screen. An alert box
CN2 Handheld Computer User's Manual