3 Tap Start > Intermec Settings > Communications > 802.11
Radio > Security Settings > Certificates.
4 Select Import Root Certificates and tap Run App to load
the .cer file. A dialog box appears asking if you want to add
the certificate to the root store.
5 Tap Enter to add the certificate. A message box appears
telling you that the root certificate has been imported.
6 Tap OK to close the Success message box.
7 Select Import User Certificate to load the .der and .pvk files.
A message box appears telling you that the certificate has been
imported.
8 Tap OK to close the Success message box.
9 Configure your CN2 for WPA or 802.1x security.
CN2 Handheld Computer User's Manual
Chapter 3 — Adding the CN2 to the Network
61